Rhino Grip Tape Installation Instructions

Roll out SpeckDeck™ in desired location.

Clean floor where tape is to be applied with rubbing alcohol.

Apply Rhino Tape to floor, 1/2 way under the SpeckDeck™, as shown above.

Roll out the next piece of SpeckDeck™ aligning the sides together.

Fold back one piece of SpeckDeck™ and peel off paper backing.

Starting at the front edge, slowly fold SpeckDeck™ onto tape,

positioning edges as close together as possible. Press firmly into place.

Fold back front edge, clean floor with rubbing alcohol and apply tape to floor.

Remove paper backing and fold SpeckDeck™ onto tape, pressing firmly into place.